Hi all, the district I’m in only does Internet copper connections and this plug seems to corrospond to sunrise modem help sheet BUT left plug says TV / right side say R ( assuming that’s radio. Can someone tell me if this is the correct plug for dsl or….
what a beautiful landlord special, took extra care to smear the paint inside it.
yeah you need a RJ11 or RJ45 port. if you dont have one you’ll need to ask a electrician to wire one up for you. He will connect a U72 cable to the Network copper input of your house.
Replace that shit. It’s got paint inside.
Are you familiar with Sunrise already? Move to Swisscom if you want to spare yourself from *most* headaches 🙂 If stability isn’t too important for you, you can consider getting cable internet too
​
As others have said: RJ11
Does sunrise not do the alternative via tv cable?
Not 100% sure but often when there is no ethernet or fibre you can fallback to the TV cable for your router.
Neither. DSL is over the phone line. Those are (cable) TV and Radio sockets.
However if you use “DSL” as a ctach me all term, and you have got a cable modem (UPC connect box) with a coax connection than it would be the Radio connection you have to use.
If it doesn’t work it might be due the sloppy painter or because you would need a more modern outlet.
Be aware of the extra cost ( like 300.- a year) for the plug
When you use another privider with the phone or ethernet connection you dont have that
I’ve recently switched from sunrise dsl to hfc. I had an old socket that was giving me trouble.
After a small call with Sunrise, they put me in contact with the local cable company and they changed the socket and controlled the signal free of charge.
It does not matter wheter you use the right or the left one. Its the same cable behind the wall 👍🏼
12 comments
Where the cable fits?
Hi all, the district I’m in only does Internet copper connections and this plug seems to corrospond to sunrise modem help sheet BUT left plug says TV / right side say R ( assuming that’s radio. Can someone tell me if this is the correct plug for dsl or….
what a beautiful landlord special, took extra care to smear the paint inside it.
yeah you need a RJ11 or RJ45 port. if you dont have one you’ll need to ask a electrician to wire one up for you. He will connect a U72 cable to the Network copper input of your house.
Replace that shit. It’s got paint inside.
Are you familiar with Sunrise already? Move to Swisscom if you want to spare yourself from *most* headaches 🙂 If stability isn’t too important for you, you can consider getting cable internet too
​
As others have said: RJ11
Does sunrise not do the alternative via tv cable?
Not 100% sure but often when there is no ethernet or fibre you can fallback to the TV cable for your router.
Neither. DSL is over the phone line. Those are (cable) TV and Radio sockets.
However if you use “DSL” as a ctach me all term, and you have got a cable modem (UPC connect box) with a coax connection than it would be the Radio connection you have to use.
If it doesn’t work it might be due the sloppy painter or because you would need a more modern outlet.
Be aware of the extra cost ( like 300.- a year) for the plug
When you use another privider with the phone or ethernet connection you dont have that
You need to replace this with something like this https://www.brack.ch/feller-ediziodue-multimedia-dose-dd19-fuer-r-tv-modem-419902 where you have 3 sockets the small one below is the one for internet.
I’ve recently switched from sunrise dsl to hfc. I had an old socket that was giving me trouble.
After a small call with Sunrise, they put me in contact with the local cable company and they changed the socket and controlled the signal free of charge.
It does not matter wheter you use the right or the left one. Its the same cable behind the wall 👍🏼