How do I connect a light bulb to these?

29 comments
  1. Alternatively you can unscrew the lid and connect the lamp straight to the socket but I’d advice you not do it unless you’ve done electrical work before

  2. Please don’t listen to ‘glue paperclips/screw that thing open’ – advices if you don’t have correct knowledge about electricity. You seriously risk hurting yourself/worst case your life with these DIY – solutions.

    Be safe ❤

  3. To be as clear as possible:
    -that is NOT a lamp that you put light bulbs in
    -that IS a socket for a ceiling lamp (that you then put light bulbs in)

  4. You don’t. You connect the light bulb to a lamp, which then gets it’s power from that socket, and hangs from that hook.

  5. 1. Buy a lamp with a plug matching to this type socket.
    2. Hang lamp from the hook.
    3. Attach plug to the socket. If you don’t feel confident, you could turn off the mains while doing this.

    Living abroad, this is one of the small things that I miss from Finland. Where I’m living there’s just wires hanging from the ceiling and have to call an electrician.

  6. So I was in similar situation when I moved here few months back. What I did? I took the picture just as this one and walked into a shop near of workplace. It’s called K-Rauta. I asked the staff there. They were super helpful. And then there was light 🙂

  7. Your lucky you have that outlet plug and hook already installed. My apartment just has wires hanging down from the ceiling and I’ve been too nervous to try and install the outlet plug and hook myself.

  8. you will never get it flush to the wall. it’s an awful process. stand on a ladder–at the same time you are plugging something in, you are attaching the lamp to the hook, and while you need to push it against the ceiling, you will inevitably unhook it.

Leave a Reply