Looks like you need to turn on the burner by touching the button at the bottom that corresponds with eacc burner. You can see a small part of the button that is bolder.
Press far right button ( | )
You may want to try YouTube or Google. Just put the cooktop model number in and see what comes up.
Usually you need to press and hold sensor buttons. In mine its ( | ) first, them lock (key button) . Then the one that I want to turn on and press +
Press the | button, then the heater button, then + to adjust the temperature
U need to put the pot on top and then press buttons to make it start, propably it has some safety trigger
A stove shouldn’t be this difficult, smh. It’s gotta be broken
Has it been properly connected by electrician? These stoves should be connected by someone who can put stamp on the documents in order to get warranty. If it is indeed connected, try and read the manual.
IMPORTANT TO KNOW: Induction type only works with proper induction-ready pans and pots. If you don’t have those, it might just display E for Error or F for fault or do nothing at all… So it won’t heat without a pan/pot, because it’s the pan that gets heated by induction.
Lol, did you just try to put it on tabletop and tried to power it on like an electric kettle xD
Something feels off about these circles
PiP
I have a small induction stove and to turn it on I need to touch and hold the (|) button on the right. If it works then a red LED lights up under the lock button (on your stove it’s the one with a key icon, on the very left). To proceed I need to unlock it by touching and holding for a second or two the above mentioned button with a key icon. Now I can start the stove with a plus + button, a digit with heating power is displayed then (0-9). You probably need to select desired burner first (4 buttons with ring icons, two on the left, two on the right) before adjusting the power.
You may also need to check the electrical box to make sure the kitchen switch is turned on. When I moved into my apartment, my landlord had it turned off and didn’t turn it back on, needless to say, I spent a solid few hours trying to figure out why it won’t turn on
Simple, beeeeeep, beeep beep beep beep beep
1. Put a pan/pot on one of the circles.
2. Turn it on.
3. Select the induction circle on which you just placed the pan, the button is on the bottom.
4. Set heat level (prob from 1 to 9) in the selected circle.
5. Wait for it to warm up.
6. Enjoy whatever you want to make :))
(It should work for most of those, if it doesn’t im sorry)
Leave that DJ related stuff and go to the kitchen for your stove. /S
Press the right (|) button for ca. 3-5 sec.
Ok I’m American but it looks like you push those small circles with the 4 curves and would increase or decrease with the plus and minus signs but good luck with the other 3 buttons
Also. You need proper electrician to sign off the warranty.
19 comments
Looks like you need to turn on the burner by touching the button at the bottom that corresponds with eacc burner. You can see a small part of the button that is bolder.
Press far right button ( | )
You may want to try YouTube or Google. Just put the cooktop model number in and see what comes up.
Usually you need to press and hold sensor buttons. In mine its ( | ) first, them lock (key button) . Then the one that I want to turn on and press +
Press the | button, then the heater button, then + to adjust the temperature
U need to put the pot on top and then press buttons to make it start, propably it has some safety trigger
A stove shouldn’t be this difficult, smh. It’s gotta be broken
Has it been properly connected by electrician? These stoves should be connected by someone who can put stamp on the documents in order to get warranty. If it is indeed connected, try and read the manual.
IMPORTANT TO KNOW: Induction type only works with proper induction-ready pans and pots. If you don’t have those, it might just display E for Error or F for fault or do nothing at all… So it won’t heat without a pan/pot, because it’s the pan that gets heated by induction.
Lol, did you just try to put it on tabletop and tried to power it on like an electric kettle xD
Something feels off about these circles
PiP
I have a small induction stove and to turn it on I need to touch and hold the (|) button on the right. If it works then a red LED lights up under the lock button (on your stove it’s the one with a key icon, on the very left). To proceed I need to unlock it by touching and holding for a second or two the above mentioned button with a key icon. Now I can start the stove with a plus + button, a digit with heating power is displayed then (0-9). You probably need to select desired burner first (4 buttons with ring icons, two on the left, two on the right) before adjusting the power.
You may also need to check the electrical box to make sure the kitchen switch is turned on. When I moved into my apartment, my landlord had it turned off and didn’t turn it back on, needless to say, I spent a solid few hours trying to figure out why it won’t turn on
Simple, beeeeeep, beeep beep beep beep beep
1. Put a pan/pot on one of the circles.
2. Turn it on.
3. Select the induction circle on which you just placed the pan, the button is on the bottom.
4. Set heat level (prob from 1 to 9) in the selected circle.
5. Wait for it to warm up.
6. Enjoy whatever you want to make :))
(It should work for most of those, if it doesn’t im sorry)
Leave that DJ related stuff and go to the kitchen for your stove. /S
Press the right (|) button for ca. 3-5 sec.
Ok I’m American but it looks like you push those small circles with the 4 curves and would increase or decrease with the plus and minus signs but good luck with the other 3 buttons
Also. You need proper electrician to sign off the warranty.