September 5, 2026
|


3

Something is afoot at The LEGO Group this year with quality control and testing, and I’m starting to get really concerned. Crackgate seems to be getting worse by the day as LEGO fans encounter issues with the new Gingy minifigure.

Following reports that Patrick Star minifigures from the new LEGO Spongebob Bikini Bottom set have begin cracking (from personal experience), there are now plenty of reports of something similar happening to Gingy from 71053 Shrek Collectible Minifigures, which launched this week as part of LEGO’s September 2026 releases.

As Collectible Minifigures (and Shrek) have been immensely popular, plenty of people online have bought the minifigures, and there seems to be an issue with Gingy as well, with stress marks forming on his head.

https://www.facebook.com/groups/686032225514186/permalink/2259360938181299

https://www.facebook.com/groups/1532129557644306/permalink/2274529026737685

They’re all over social media if you belong to LEGO Facebook Groups, Instagram or on Reddit.

I took a closer look at mine (I just received my review copy, and am still working on my review!), and lo and behold, I discovered a very obvious stress mark on my Gingy that I had assembled.

I do recall that when I first put Gingy’s head on the body, I was surprised at how tight of a fit it was, which I think is what’s causing it.

Here’s the back where you can also see the stress mark. That said, I don’t think these are cracks, but it’s still early days, and it could develop into a hairline crack like Patrick.

Thankfully, I had a spare Gingy (LEGO typically sends us two complete sets to review), and I opened this one fresh out of the box, and didn’t attach it to the torso.

There is however, a pretty obvious mould line that looks like a scratch that runs down the front and back, emerging from the top and bottom edges of Gingy’s head.

I do not believe this is a crack, and I think this is more of a mould line, which is a very common part of how LEGO minifigures are made. Mould lines occur when the ABS plastic is injected into the mould, and the line forms when the plastic flows meet.

You can see these fine lines in most minifigures on the sides of the torsos, just below the arms. They’re not cracks per se, so there’s nothing to worry here, and I don’t think the Gingy heads are cracking.

What is happening is that Gingy’s head is definitely stressed when you insert them into the torsos. Here’s a side by side of a fresh Gingy head, and one that’s attached to the torso where you can see a white mark starting to form where the mould lines are found.

What I do think is happening is that these are the weakest points of the head, and the neck hole is slightly too narrow, that when inserted, it starts stressing out the plastic which causes the white stress marks to appear.

To illustrate it, I used a bright torchlight to illuminate Gingy’s head, where you can see that the middle part is a lot thinner than the other sections.

While it isn’t as serious of an issue as Patrick Star minifigures cracking and splitting apart from the tension, it’s still not ideal and in my opinion, very shocking from The LEGO Group as their quality control is usually near-perfect, and you very rarely encounter issues like this on a massive scale.

With the number of Shrek Collectible minifigures being produced, and many fans getting their hands on them, it makes sense that a lot of people would be encountering this issue, especially as Gingy is one of the more popular minifigures in the series and one that many Shrek fans want.

It’s not great, and I find it very surprising that this flaw wasn’t caught during testing or QA, and doesn’t reflect well on LEGO which prides itself with the motto “only the best is good enough”.

So what can you do if you encounter this stress mark on your Gingy minifigures? Get in touch with Customer Service and request a replacement. It ultimately won’t fix the issue as this seems to be a structural flaw with Gingy’s head design, and unless LEGO commission a brand new mould to fix this (which I doubt they will, as LEGO Minifigures are produced in limited quantities), you’ll likely still encounter this issue if you attach it to the torso.

What is important is that LEGO collects data on Customer Service and Broken Parts requests, and pays very close attention when consumers start reporting these issues, so if you have a Gingy minifigure and discover a very pronounced mould line, or stress marks, the most effective thing to do would be to write in to LEGO’s Customer Service with your experience.

Like I said, I’ve been a LEGO fan for a long time, and it’s very very shocking to see two back-to-back issues so close to one another, and makes me wonder if LEGO’s incredible growth trajectory is starting to acerbate issues like these. I just hope that LEGO’s rapid growth and ambitions don’t come at the expense of Quality Control and Assurance, and that the existing processes and team members aren’t stretched too thin.

Have you found this to be an issue with your Gingy minifigures? Let me know in the comments!

To get the latest LEGO news and LEGO Reviews straight in your inbox, subscribe via email, or you can also follow on Google News, or socials on Facebook, Instagram (@jaysbrickblog), Bluesky or subscribe to the Jay’s Brick Blog Youtube channel.

3 responses to “Are Gingy minifigures from LEGO Shrek starting to crack too?”