Few movie monsters command a screen quite like Godzilla. There’s the colossal bulk, the jagged row of dorsal fins, and that blue-white atomic breath: an image so iconic it has been flattening cinema’s skylines, and its insurance premiums, for decades. Now the King of the Monsters arrives in 5,363 pieces as LEGO Ideas 21375 Godzilla, based on a fan design by Matthew Esposito that stomped its way to shelves through the LEGO Ideas program.

The model recreates that poster: Godzilla firing his heat ray straight up at the sky. It’s more than a monster in brick form, too. It’s a display piece that tries to capture a sense of scale and one single, overwhelming moment of drama. But can 5,000-plus bricks really deliver all that scaly menace and big-screen spectacle? Let’s stomp in with guest reviewer and Godzilla connoisseur DeRa and find out!

LEGO Ideas 21375 Godzilla | 5,363 Pieces | Available November 27 | US $449.99 | CAN $629.99 | UK £349.99

The LEGO Group sent The Brothers Brick an early copy of this set for review. Providing TBB with products for review guarantees neither coverage nor positive reviews.

The box and contents

The front of the box shows Godzilla in strict profile. The blue-white backlight suits the black background typical of LEGO’s adult-oriented sets rather well. (Deep-cut alert: it’s very reminiscent of the closing scene of Godzilla vs. Destoroyah. Nobody asked, but here we are.) It’s also rare to see a model pictured so flatly side-on. It looks less like a product shot than a blueprint.

Around the back, Godzilla is letting rip with his heat ray beside the poster from Godzilla: King of the Monsters (2019), offered up as a side-by-side comparison. A small diagram also explains that the ray swaps in by removing his tongue.

Inside are two further boxes, holding 41 paper bags and three instruction manuals between them. These inner boxes are absurdly cool: place them side by side and they form a single Godzilla silhouette. There’s no way these are getting thrown out.

The manuals come with generous front matter: notes from Matthew Esposito and the LEGO design team, an introduction to Godzilla and his films, and even a MonsterVerse timeline. The design team’s notes reveal that the model is almost twice the size of Esposito’s original and that a full month went into working out the angles of the tail alone. They also describe the back spikes as “a masterclass of LEGO maths,” easily the scariest phrase in the entire set.

The build

As with any self-respecting city-flattener, construction begins with the feet. Flip one over and you’ll find some wonderfully unusual building and very tidy gap management. One small gripe: the base of the Pneumatic Hose Connector with Axle Connector flares out ever so slightly, so the claws never quite close up against one another.

The ankles rotate on turntables. The lower legs are angled using two Mixel joints, with both side panels attached via SNOT.

Next come the thighs. The knee uses an A-shaped wedge plate to lock in a 45-degree bend, then Technic liftarms form an equilateral triangle with seven-stud sides.

Built into the hip, that triangle fixes the torso at a 105-degree angle and holds the slight forward lean seen in the poster.

The pelvis comes next, and the finished legs plug into it with just two Technic pins. On their own those would pop out at the first sideways tug, so a Harpoon element is driven in from another direction to hold everything together. Why a Harpoon? Probably because a regular bar, once inserted here, would never come back out.



That completes the lower body. The surface is mainly wedges, wedge/round plates, and curved slopes, stacked in staggered layers to give Godzilla his texture and depth.



Now for the base of the tail, and another intriguing angled connection. It attaches with Wither Skeleton legs, which is entertaining enough in itself, but this part can also be reinforced with a sideways clip connection.



This internal framework then receives left and right skin panels, each split in two, plus the three tail units that follow on from them.

The result is one of the most beautiful shapes in the entire model. The gaps created by all that angling are filled with a 4×8×1 windscreen, a very effective trick.



Then come the dorsal fins, running from the rump to the base of the tail. They’re modular, and Earth Blue, Dark Azure, and Medium Azure combine beautifully to recreate Godzilla’s blue-white glow.

All of them appear to attach with locking hinges.

Look closely and you’ll see that the glow reflecting off the hide around the fins is rendered in Sand Blue. I love this kind of obsessive little detail.

On to the tip of the tail. It uses 1×2 plates with bar arm up and 1×4 offset plates as hinges, a combination that turns out to play very nicely with 2×4 wedge plates.

The surface panels go on using brackets.

The very end section slots in on an axle and is then locked down completely by the overlapping locking hinges of the fins.

And with that, the tail tip is finished. My personal favorite detail here is the folded-in design along the inside of the curve.



Here’s a nice touch: you get to choose whether the tail curls to the right or to the left. The instructions branch at this point, Choose Your Own Adventure style, so just skip to the pages for your preferred direction.



Now we reach the torso. The inner structure is almost entirely arches plus window and door frames, parts that have been cropping up throughout the build and a clear sign the designers have been thinking hard about both strength and weight. Despite doing without Technic parts here, it’s sturdy and, above all, light. It is also the most structurally sound building Godzilla has ever been anywhere near.



Godzilla’s dorsal fins usually run in three rows, and these are the two outer ones.



The fins on the back are built as one with sections of the back itself, and they attach via two locking hinges.



The shoulder joints use a multi-directional articulated part that you may know from Ninjago. Here, though, one of its axes exists only to hold the axle at an angle, and a 3×3 Corner Round is added to take away its freedom entirely, leaving rotation in the vertical direction only.



The shoulders feature a particularly large number of connections coming in on the diagonal. Here, the neck and chest are tied together with four hinge connections.



The torso and shoulders then join using just two Mixel joints. That’s by design, so the model can be separated easily.



 

Next up: the head. Build the base and you’ll discover a tiny brick-built Matthew Esposito sitting inside. It’s a lovely tribute. It’s also, when you think about it, a man who has been swallowed by his own idea, which is the fan designer’s dream. Probably.

The eyes are Bar 1L with 1×1 Round Plate, and Medium Azure is a new color for this part.



In my opinion, the teeth are the make-or-break detail of any Godzilla: essential to get right and very hard to do. They need to look craggy, but existing fang, horn, and claw elements are simply too big unless your model stands over a meter tall. The solution here is clever: it uses the stud-clearance notches cut into round parts.

The cheeks are built separately.

The lower jaw then gets sandwiched between the left and right cheeks.



That’s the head done. To my mind, the face is one of the most important parts of the whole creature, and this is easily the most accomplished section so far. It holds up from every angle. The one drawback is that the jaw doesn’t move, leaving him stuck mid-roar for all eternity.



Next is the neck joint, starting with a unit of two sockets linked together using Technic parts.

It connects to the Tan ball inside the head.



Then the whole thing goes onto the torso built earlier. The circular neck lets it move without clashes or gaps, and the otherwise conspicuous round tiles are hidden by SNOT panels from the left and right.



Now the fins on the back can go on.

The arms are brilliantly designed, concealing their rotation joints with the bare minimum of cover.

What really surprised me is the way a hinge top covers the connection at the base of each half arch.

The hands use a part that first appeared as the halo on Formula 1-style cars to splay the fingers. The technique debuted in 76334 Iron Man Mark 3 Collectors’ Edition and has been lending a hand to large figures ever since.



Add the back of the hand and they’re complete. The fingers have a working first joint as well, so there’s a relatively generous range of movement.

The upper arm, its roll joint, the elbow, and the hand are all built separately and then joined up.



Time for the largest fins. Leave even the slightest empty space and, as you can see, window frames come rushing in to shave off a little more weight. Watching the diagonally mounted SNOT parts set the Medium Azure plates in place with pinpoint precision is a thing of beauty. This is the part that earns the title “a masterclass of LEGO maths.” These fins also connect to the back via two Mixel joints, but this time on the diagonal. It really is beautifully built.

Last of all, the heat ray. It’s about 10 cm long and deepens from White through Light Aqua and Medium Azure to Dark Azure.

To fit the ray to Godzilla’s mouth, you first have to yank out his tongue. Finally, the upper and lower halves are joined with two Mixel joints, and we’re done.



The finished model

At about 50 cm tall, this is one of the largest character models in LEGO Ideas history, and it looks every centimeter of it.

Articulation is limited to the ankles, shoulders, elbows, hands, and neck. Any ambition of being an action figure has been abandoned in favor of sheer size and accuracy, leaving a dedicated display model. I couldn’t spot a single printed part, either.

Presumably because it’s based on the poster, side-on is where the model looks most accurate.

The coloring along the back is hugely effective, and the way the fins fan out from behind is really gorgeous.

From the front, he looks a little ungainly. Display him side-on.

I put him on the scales and he came in at a hefty 3.7 kg. (The shutter speed has scrambled the readout on the scale in this photo.)

Because the angle of the head can be changed, he can direct his roar at the heavens, a rival kaiju, or the office block of your choosing.



So how does the finished set compare with the fan-made original?

Matthew Esposito’s original LEGO Ideas design

Past Ideas sets have ranged from minor cosmetic tweaks to wholesale changes in minifigures or overall composition. To my eye, this one has traveled a long way from its source.

The biggest change is that the fins now glow. It’s a superb decision, transforming the model into something far more vivid and beautiful.

The silhouette has changed a lot too, prioritizing fidelity to the movies. Godzilla’s design varies slightly from film to film even within the MonsterVerse, and while the fan design is recognizably a MonsterVerse Godzilla, it’s hard to say exactly which one. The official set clears that right up by drawing on the unforgettable roaring scene from Godzilla: King of the Monsters (2019).

The surface is very different as well. The fan design uses slopes and wedge plates for a rugged, reptilian hide. The production model is mostly curved slopes and wedges, which gives it a much sleeker look, in keeping with LEGO’s recent enthusiasm for using those parts on its creatures.

LEGO Ideas 40888 Godzilla Logo & Footprint | 5,363 Pieces | Available November 27 | Gift with Purchases of 21375 Godzilla

And there’s a second set: a gift with purchase in the shape of a Godzilla footprint. Alongside the footprint is a 3D rendition of the blue logo from Godzilla: King of the Monsters, all designed to sit next to 21375. Behind the logo are wrecked buildings and a tiny printed Mothra.



Inside are the instructions, three poly bags, and a separate bag of large plates.

First up is the base-slash-footprint. The outline is made of wedge plates and triangular tiles, while the strata deepen through Medium Stone Gray, Dark Stone Gray, and Black. Four 3×3 round tiles sit in the center.

Next, the logo. The brown buildings are built sideways, with 1×2 round elements with bars sandwiched partway through. These come into play for the reversed connection on the Z.

The A is the other special case, attached symmetrically to a building with clips. The Tan building also gets a small fire.



And just like that, the logo is finished. It’s an astonishingly faithful take on the movie title, and it’s hard to imagine it being any better. The back, though, clearly isn’t meant for public viewing.



Last of all comes Mothra, the only printed part in the entire package. Who knew that a butterfly element used at minifigure scale would one day be cast as Mothra? It’s gloriously surreal, and it made me laugh. Queen of the Monsters, everybody.

Attach the logo to the footprint and you’re done.



You can also put the logo in front with the footprint behind it.

Displayed beside Godzilla, the two sets really do complete each other as one big display. This GWP is essential for getting the most out of the main model.

Godzilla vs. My Godzilla

Before wrapping up, a word from the self-proclaimed LEGO Godzilla expert writing this review. I’ve built plenty of Godzilla MOCs, so here’s my take, along with a comparison against one of my earlier models.

The biggest headache in building any Godzilla is the weight of the lower body. The load concentrates around the rump and the base of the tail, so if you build him as an action figure, he gets dragged backwards and topples over, which isn’t the display of dominance you were going for. This set solves the problem by fixing the whole lower body in place and giving the tail a definite point of contact with the ground. If the tail were articulated like those on earlier sets, he couldn’t stand up on his own. A forward lean might balance, but in a nearly vertical stance like this one it’s close to impossible. Giving up poseability in favor of volume and accuracy was exactly the right call.

My first impression of this set was 21349 Tuxedo Cat. It has the same ornamental presence and the same SNOT-built skin of curved slopes and wedges. The interior likewise uses almost no Technic and is similarly fond of window frames. Both are Ideas sets, so my guess is that the same design team is behind them.



That’s my MOC on the right. It stands 25 cm tall, which should give you an idea of just how enormous and imposing this set is.

If I’m forced to nitpick, and as a self-proclaimed expert I feel contractually obliged, I’d change the thickness of the back and tail and the roundness of the surface. To truly recreate the moment Godzilla fires his ray into the sky, the back should bulge, whereas here the line drops straight from the back of the head to the lower body. The area around the rump and the base of the tail also looks a little small overall. As I mentioned, that’s where the most weight sits, precisely because it’s the largest part of Godzilla.

And because the surface is made up of curved slopes and wedges, the overall roundness doesn’t quite suit him. For Godzilla’s reptilian, dinosaur-like hide, the slopes and wedges of the fan design feel closer to the mark.

Final thoughts

So is this the perfect LEGO Godzilla? Not quite. I’d like a bigger back, a heftier rump, and a rougher hide, and I’ll happily keep saying so to anyone who stands still long enough. But those are the quibbles of someone who has spent far too long thinking about this particular lizard. What matters is how much this set gets right: a stance that solves the problem that has toppled so many brick-built Godzillas, glowing fins you can’t take your eyes off, and the sheer presence of a display model. And inside that head rides a tiny Matthew Esposito, quietly reminding you where this monster came from.

As a large-scale model, it’s not going to be a casual purchase. But see it in person and I guarantee it has more presence and beauty than even the box suggests. The GWP in particular is an ideal add-on, so if you’re planning to bring a Godzilla home, I strongly recommend doing it while the GWP is still available. And because he stands nearly upright with his tail curled in, you don’t have to worry too much about where to put him.

Back in 1998, a rather different Godzilla movie promised us that size does matter. It took LEGO 5,363 pieces to properly prove it. Long live the king.

LEGO Ideas 21375 Godzilla | 5,363 Pieces | Available November 27 | US $449.99 | CAN $629.99 | UK £349.99

The LEGO Group sent The Brothers Brick an early copy of this set for review. Providing TBB with products for review guarantees neither coverage nor positive reviews.

Related

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.