{"id":9745,"date":"2026-04-28T10:18:23","date_gmt":"2026-04-28T10:18:23","guid":{"rendered":"https:\/\/www.europesays.com\/france\/9745\/"},"modified":"2026-04-28T10:18:23","modified_gmt":"2026-04-28T10:18:23","slug":"europes-largest-3d-printed-apartment-building-completed-in-france","status":"publish","type":"post","link":"https:\/\/www.europesays.com\/france\/9745\/","title":{"rendered":"Europe\u2019s largest 3D printed apartment building completed in France"},"content":{"rendered":"

PERI 3D Construction<\/a>, a company focused on 3D concrete printing for the construction sector, has completed ViliaSprint\u00b2<\/a> in Bezannes, France, a three-story residential building described by the project team as Europe\u2019s largest 3D printed multi-family apartment building. Developed by Plurial Novilia<\/a>, a French social housing provider and subsidiary of Action Logement, the project delivers 12 social housing apartments across 800 m\u00b2 of living space. Using a COBOD BOD2 3D<\/a> construction printer, the team said the overall project timeline was reduced by three months compared with conventional construction.<\/p>\n

Project data released by the partners shows that the shell was completed in 34 effective printing days, compared with 50 originally planned. Results from a near-identical building constructed on the same site using conventional methods showed that shell construction time was cut in half. The printed structure also required three site operators, compared with six for the conventional shell. Waste fell from 10% to 5%. Project figures also stated that a 5 cm layer height, 2.5 times higher than the layer height used, would have reduced printing time for the full 800 m\u00b2 structure to 14 days.<\/p>\n

\"Close-upClose-up of the 3D printed concrete layers on ViliaSprint\u00b2, showing the characteristic ribbed texture produced by the COBOD BOD2 printer as it extrudes concrete in continuous passes. Photo via COBOD.<\/p>\n

ViliaSprint\u00b2 is described by the project team as the first building in France where both the load-bearing structure and all walls were printed directly on site. PERI 3D Construction operated the COBOD BOD2 gantry system, which extruded concrete layer by layer to produce the shell. Holcim, a building materials company, supplied the printable concrete through its TectorPrint technology. That material was reinforced with synthetic macro fibres and formulated within the company\u2019s CO\u2082-reduced ECOPact range. Printing began in March 2025 and finished ahead of schedule after the team optimized the sequence for installing prefabricated floor slabs, halving the number of times the print gantry had to be repositioned.<\/p>\n

J\u00e9r\u00f4me Florentin, Director of Project Development at Plurial Novilia, said, \u201cThis result confirms the enormous potential of this construction method, which reduces build times and improves working conditions on site.\u201d Workers controlled the printing robot by tablet rather than carrying out heavy lifting, reducing musculoskeletal risk on site. Dr. Fabian Meyer-Br\u00f6tz, Managing Director of PERI 3D Construction, said, \u201cWe are proud to have supported this project as technology partner and print executor. The result shows vividly what is already possible in 3D building printing today, faster construction, fewer workers, and fully load-bearing structures. This is an important milestone and motivation to push this technology further.\u201d<\/p>\n

\"Street-levelStreet-level view of ViliaSprint\u00b2, Europe\u2019s largest 3D printed multi-family building, in Bezannes, France. Photo via COBOD.<\/p>\n

Project details also pointed to material and design effects beyond labour and schedule. Curved fa\u00e7ades and a rounded floor plan were included because those shapes could be produced without the cost premium associated with conventional formwork. The optimized geometry reduced concrete volume by about 10%. On-site concrete production also reduced transport emissions. ViliaSprint\u00b2 includes perlite insulation, timber balcony structures, 500 m\u00b2 of photovoltaic panels, and a hybrid gas and heat pump system from Atlantic Syst\u00e8mes. Project partners said the building achieves about 60% energy self-sufficiency while meeting France\u2019s RE2020 2025<\/a> targets.<\/p>\n

Plurial Novilia and its partners now plan a follow-on development of about 40 apartments using two 3D printers simultaneously. The target is to reduce print time by a factor of four and bring costs in line with conventional construction through greater scale and process maturity.<\/p>\n

Code-compliant 3D printed housing begins to move beyond single-use demonstrations<\/p>\n

Japan recently provided one of the clearest tests of whether 3D printed housing can satisfy strict structural constraints<\/a> rather than simply demonstrate geometric freedom. Construction technology company Kizuki<\/a> completed a 50 m\u00b2 two-story reinforced concrete home that received government approval under Japan\u2019s earthquake-resistance rules, among the most demanding in the world. Built with a combination of on-site and off-site printing using COBOD technology, the project showed that 3D printed residential construction can meet seismic compliance requirements while reducing reliance on labor-intensive conventional methods. That result matters here because it established that structural approval, not printing itself, remains one of the central barriers to wider residential adoption.<\/p>\n

Italy has shown a related constraint<\/a> from the certification side. WASP 3D<\/a> Build completed the printed walls of Itaca, a 164.9 m\u00b2 home designed to comply with Italian and European construction rules, including earthquake-resistance standards. Using a four-arm Crane WASP system, the structure was produced with a lime-based material rather than concrete, while insulation, mechanical systems, and passive energy features were integrated into the broader design. That project demonstrated that permanent 3D printed housing can be aligned with existing regulatory frameworks, but it also underscored the limits that still shape the sector: certification remains difficult, and most approved examples remain individual homes rather than larger multi-family developments. Against that backdrop, the Bezannes project extends the discussion from code-compliant single-home construction to multi-family housing built under direct comparison with conventional methods.<\/p>\n

\"\"Daytime exterior view of Japan\u2019s first government approved two-story 3D printed. Photo via ONOCOM.<\/p>\n

3D Printing Industry is inviting speakers for its 2026 Additive Manufacturing Applications (AMA) series, covering Energy, Healthcare, Automotive and Mobility, Aerospace, Space and Defense, and Software. Each online event focuses on real production deployments, qualification, and supply chain integration. Practitioners interested in contributing can complete the call for speakers form here<\/a>.<\/p>\n

To stay up to date with the latest 3D printing news, don\u2019t forget to subscribe to the 3D Printing Industry newsletter<\/a> or follow us on LinkedIn<\/a>.<\/p>\n

Explore the full Future of 3D Printing<\/a> and Executive Survey<\/a> series from 3D Printing Industry, featuring perspectives from CEOs, engineers, and industry leaders on the industrialization of additive manufacturing<\/a>, 3D printing industry trends 2026<\/a>, qualification, supply chains, and additive manufacturing industry analysis<\/a>.<\/p>\n

Featured photo shows Close-up of the 3D printed concrete layers on ViliaSprint\u00b2, showing the characteristic ribbed texture produced by the COBOD BOD2 printer as it extrudes concrete in continuous passes. Photo via COBOD.<\/p>\n","protected":false},"excerpt":{"rendered":"PERI 3D Construction, a company focused on 3D concrete printing for the construction sector, has completed ViliaSprint\u00b2 in…\n","protected":false},"author":2,"featured_media":9746,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[7608,7609,5,7610,7611,7612,7613,7614,7615,7616,7617],"class_list":["post-9745","post","type-post","status-publish","format-standard","has-post-thumbnail","category-france","tag-cobod","tag-fabian-meyer-brotz","tag-france","tag-henrik-lund-nielsen","tag-jerome-florentin","tag-johnny-huat","tag-kizuki","tag-peri-3d-construction","tag-plurial-novilia","tag-viliasprint","tag-wasp-3d"],"_links":{"self":[{"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/posts\/9745","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/comments?post=9745"}],"version-history":[{"count":0,"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/posts\/9745\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/media\/9746"}],"wp:attachment":[{"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/media?parent=9745"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/categories?post=9745"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.europesays.com\/france\/wp-json\/wp\/v2\/tags?post=9745"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}