CHICAGO — It’s early November and you’re waiting for the Red Line train on the Sheridan platform.

As the wind whips your face you remember: The Chicago Transit Authority’s heat lamps turn on Nov. 1 each year. You press the button and look up to feel the warming glow — a beacon of light on your bare skin that makes you feel alive again. 

But what’s the history behind those magical lamps that warm commuters from November through March every year?

Here’s everything we know about Chicago’s CTA heat lamps, including their history, locations, how they work and what riders should do if a light isn’t working.

Many Chicagoans welcome the CTA heat lamps that are available starting Nov. 1. Credit: Facebook/CTA

From Experimental Gas To Electric ‘People Heaters’

Before the CTA took over for private “L” companies, it was common for “L” stops on some lines to have station houses heated with pot-bellied stoves. The Quincy “L” stop in the Loop is one of the few stations to still have a true station house, and over the years, the CTA has demolished most that type of station, in favor of simpler open-air platforms.

The idea of “ray heaters” at “L” platforms was first reported in the newspaper in November 1959. The first phase of the “experiment” consisted of installing four gas-fired heaters that emitted infrared light for $4,000 along a 12-foot stretch at the north end of the southbound Fullerton Avenue stop, with plans to continue later in the winter comparing the gas heaters with upcoming electric heaters, according to the Tribune. 

“The bone chilling cold of open platforms of elevated stations may become merely an unpleasant memory in Chicago,” the Tribune wrote.

Those early heaters included automatic switches that turned them on only during non-rush hours if the temperature was below freezing, according to the article. 

“We believe there is no need for the heaters during rush hours [7 to 9 a.m. and 4 to 6 p.m.] because the frequency of elevated trains at those times cuts waiting periods to a minimum,” former CTA General Manager Walter J. McCarter said. 

This view of the Fullerton station house in 1988 shows that much of the original station was still in use, including the original ticket agent booths. Credit: Facebook/CTA

In February 1960, five electric, infrared heat lamps were installed at the north end of the northbound Fullerton Avenue “L” platform in “another experiment with overhead, radiant heating” for outdoor train stations, McCarter said, according to the Tribune.

“The tests are being made to find out the effectiveness of using overhead heaters on station platforms for the comfort of CTA patrons who are required to wait for trains during nonrush hours,” McCarter told the newspaper.

In fall 1965, three old station house buildings at Wabash Avenue “L” stations in the Loop were removed and windbreak canopies were installed in their place. At the time, the CTA said it was also considering adding electric overhead heaters on the wind shields.

Four years later, in 1969, CTA train platforms opened at 95th Street, along the Dan Ryan Expressway heading south and along the Kennedy Expressway heading northwest. Those new stations were all equipped with electric overhead heaters that the passengers could control. The following year, it was reported that heaters had yet to be installed at Lake Street stations along what’s now the Green Line, although the CTA officials said they hoped to eventually put them there.

“We have plans, lots of plans for these things, but we have no money,” a CTA representative told the Tribune. “These heaters cost $10,000 per light for installation and about $500 a month for electrical operation. We are probably more ashamed of these older stations than the public, but we just have no money to do anything about it.”

Heat lamps are on at the 95th/Dan Ryan CTA Red Line station on Nov. 8, 2023. Credit: Colin Boyle/Block Club Chicago

In 1975, the CTA saw its “largest single program of modernizing rapid transit stations in Chicago’s 82-year history of elevated train operations,” The Daily Calumet reported. Among the upgrades were “overhead infra-ray ‘people heaters.’” In 1979, the CTA Board approved a new elevated station at Western Avenue on the Ravenswood Line (now the Brown Line), which was also set to have the heaters.

The year 1980 saw another leap for overhead heating lamps. In February, the CTA announced its plans for infrared heaters at 26 platforms by the end of the year, as well as heaters at bus stops and shelters at the Jefferson Park terminal, where what’s now the Blue Line ended at the time. The installation was expected to cost $59,600 and heat 80 passengers at a time, according to a story in the Tribune. Other slated installations included eight in the Loop, nine along what’s now the Green Line, three on today’s Brown Line, three on what’s now the Blue Line, as well as one on the future Pink Line, one on the Red Line and one on the Evanston Express, now the Purple Line. 

By December 1980, a CTA board member said the agency department should put less money into new buses and more into “creature comfort” improvements, like overhead heating at all its elevated stations, the Tribune reported. That sentiment was repeated 11 years later in a 1991 newspaper column submitted by Steve Tanner, which included windbreaks and overhead heaters “on all outdoor platforms and major bus stops” among his wishes for the transit department.

According to one story from 1984, architects for the CTA at one point considered making three of its O’Hare-linked outdoor platforms on the West-Northwest Blue Line completely enclosed in clear glass to help shield passengers from the cold, “but nobody could figure out how to clean such walls without taking auto traffic lanes out of service.” 

“Overhead infrared heaters help reduce the chill, anyway,” the Tribune wrote.

In June 1988, the heating lamps at the Howard Red Line station were turned on for several days by a “vandal who broke the lock on a box controlling” the heaters, and a new lock had been installed. 

The Argyle platform on the Red Line. Credit: Facebook/CTA

Updating ‘L’ Platforms 

In 1999, some heated overhead lamps were installed in fare equipment areas in addition to upgraded platforms, according to the CTA. In 2002, when Blue Line stations at Western and Hoyne/Damen were closed for improvements, plans were made to add outdoor heaters to the renovated platforms as well. 

In 2003, UIC Professor James Thompson submitted a question to the Tribune asking if the CTA could install “steal-proof fixtures” around the heated bulbs, which appeared to get stolen frequently. 

“At the various Chicago Transit Authority ‘L’ stops that I use, the bulbs in the overhead heaters seem to get stolen on a regular basis, leaving riders out in the cold,” Thompson said. 

The reporter said the paper had gotten numerous reports of missing bulbs on the Green and Blue Lines in particular. At that time, the CTA had 866 infrared bulbs that reached as high as 12,000 degrees Fahrenheit on the glass’s surface, installed across 144 train stations, the paper wrote. According to the article, CTA officials said “the fixtures themselves are ‘steel-proof’” but it was the bulbs “that seem to walk away.”

The CTA did not respond to questions about whether this is still a problem in 2026. 

By 2004, the heated shelters had become manual. Starting April 1, it could take as long as two weeks for the CTA to turn them all off, the paper reported. In 2005, the Tribune reported there were about 275 “people heaters” across 125 outdoor CTA train stations. Heat lamps weren’t installed at all stations in 2008. The Brown Line station at Rockwell, for example, lacked the heaters.

Even pigeons took advantage of the warmth, so much so that the Davis Purple Line stop earned the temporary nickname of “wing stop,” according to a news blurb. In 2013, Chicago was named the No. 4 most miserable city by Forbes in part because its winters were so brutal that the CTA had to provide heat lamps.

In 2014, the California Blue Line station reopened after a major renovation with eight new overhead heat lamps, although reports from the time state only half were working. At the time, there were over 2,200 heat lamps across 100 stations, according to the Red Eye. That year, a CTA spokesperson told the paper that it was considering keeping the lamps on past March, but she “did not know the last time the CTA extended the seasonal life of the lamps.” The bulbs in those lamps reached surface temperatures of 400 degrees. By 2018, the CTA said it had over 1,000 “L” platform heaters. That spring, it kept the heaters on past April 1 “as commuters slogged through a chilly April.”

Today, the CTA heaters are as much a part of Chicago’s cold weather lore as the infamous Blizzard of 1967.

Where Are They?

The fixtures are available at all 127 outdoor CTA train stations, according to Charles Plouffe, a CTA spokesman. Stations typically have about six lights across a bank of three fixtures, each with two lamps. Bus stops don’t usually have them, but “all stations have a bus route that connects to a rail station,” Plouffe said. In 2007, a CTA spokesperson told the Tribune that heat lamps weren’t present in all bus shelters because there was no electrical infrastructure to support them. In 2012, the CTA said it decided against adding heat lamps to new bus shelters along the Jeffrey Boulevard route due to expenses, but would consider adding them to other stops in the future.

Currently, there are no plans to install additional overhead heaters. The process requires “significant planning, space and resources to accommodate,” Plouffe said. However, a “large portion” of outdoor “L” rail stations also have enclosed spaces and stationhouses where riders can wait for their train or bus, “limiting their exposure to the inclement weather,” he added.

How Do They Work?

The lamps use electromagnetic radiation that travels through the air to warm people directly instead of warming the air around them, according to Plouffe. A 2015 story in the Tribune by Dawn Rhodes explained that commuters are heated by the lamps through the light they provide to water molecules on skin, which then move faster and produce heat. However, the story noted that the lamps may not be able to penetrate riders’ thick layers of clothes. Riders can press a button on the platform that turns the lamps on. 

The bulbs can reach temperatures of 400 degrees or more. The brand of fixtures and lamps vary and are purchased through a warehouse procurement process, Plouffe told Block Club.

Last year, the CTA and the Griffin Museum of Science and Industry formed a partnership to highlight the science behind some of the CTA’s inner workings, including explaining how the heat lamps emit heat. 

When Are They In Use?

The lamps are generally on from Nov. 1 to March 31, although they have occasionally gone into April due to cold spring temperatures. The transit agency said it monitors the weather “to help guide seasonal operation of these lamps and adjust accordingly.”

Who Maintains Them?

Each year, the lights are maintained by the CTA’s in-house electricians represented by International Brotherhood of Electrical Workers (IBEW) Locals 9 and 134, who begin inspecting and testing the devices in October. 

Customers can report a heater that’s not working through the CTA’s chatbot or by contacting CTA Customer Service at 888-YOUR-CTA (888-968-7282) or online at transitchicago.com/feedback/.

______________________________________________________________________

Support Local News!

Subscribe to Block Club Chicago, an independent, 501(c)(3), journalist-run newsroom. Every dime we make funds reporting from Chicago’s neighborhoods. Already subscribe? Click here to gift a subscription, or you can support Block Club with a tax-deductible donation.

Listen to the Block Club Chicago podcast: