Sometimes innovation doesn’t come by way of market forces, but necessity. The technologies of World War II and the space race are great examples, but even the auto industry has sometimes been pushed in a direction by forces beyond the whims of car buyers. One of those times was in the 1990s and the 2000s, when America tried to force a green revolution by having Detroit automakers build wild 80 mpg diesel-electric hybrid cars. The cars worked, but the program didn’t. Here is their story.
Back in the early 1990s, the federal government saw a disconnect between its research on environmental pollution and the technologies of the cars of the era. According to the United States Environmental Protection Agency, transportation was responsible for 32 percent of U.S. carbon dioxide emissions and was the fastest-growing polluter. America, like much of the world, was interested in a future where people could enjoy high-tech cars without them filling the air with harmful pollution. To achieve this, the federal government believed that cars needed a leap forward in technology, not just a gradual advancement.
![]()
![]()
It wasn’t just Washington and its agencies that saw a future in greener cars. Notably, in 1989, the California Air Resources Board kicked off its Zero-Emission Vehicle Program, which required that two percent of a large auto manufacturer’s total sales in California be zero-emission vehicles by 1998. California then planned for a future where, by 2003, ten percent of all cars sold in the state would be zero-emission.
2000 GM Precept Concept. Credit: GM
On September 29, 1993, President Bill Clinton gathered the CEOs of Chrysler, Ford, and General Motors to announce the Partnership for a New Generation of Vehicles (PNGV). This initiative was a public-private partnership between the Big Three and the government, and promised to produce a mid-sized family car with three times the fuel efficiency of the average 1994 model-year sedan. The goal was a high-tech sedan that achieved at least 80 mpg. Part of the marketing of PNGV was that the program would also help secure the long-term competitiveness of domestic automakers against foreign competition.
Amazingly, the automakers succeeded in building family sedans that got 80 mpg or very close to it. They did so by pairing compact diesel engines with hybrid systems. One of them is the diesel-electric Ford Prodigy sedan shown below. But while the cars were real and promising, the program had problems that would ultimately lead to its demise.
2000 Ford Prodigy Concept. Credit: Ford
The Partnership For A New Generation Of Vehicles
According to the Congressional Research Service (CRS) for the Library of Congress, the U.S. Department of Commerce led the program and coordinated related research between federal agencies. Participating agencies included the Department of Energy, the Environmental Protection Agency, the Department of Transportation, and the National Science Foundation. Representing the automakers was the United States Council on Automotive Research. Smaller players involved entities like individual investors and automotive suppliers.
The CRS notes that there was no direct federal funding for PNGV. Instead, federal funding – about $250 million per year – came from the research budgets of the affiliated government agencies. These agencies used that money to research engine technology, lightweight materials, hybrid systems, fuel cells, and emissions controls. More than half of the $250 million per year price tag came from the DOE’s energy conservation budget.
The majority of the funding for PNGV came from the automakers themselves. Collectively, Chrysler, Ford, and General Motors spent $800 million per year on the program. Run the numbers, and America’s quest to make 80 mpg sedans came at a cost of $1.05 billion per year, and that’s in 1990s money. In 2003, when the CRS report was published, that would have been the equivalent of $1.92 billion spent every year.
The 1995 Toyota Prius Concept. Credit: Toyota
CRS says that PNGV had three main goals. The 80 mpg “supercar,” as the program called it, was only one. PNGV also sought to improve the quality of American manufacturing while also implementing new technologies. Those were ambitious enough, but PNGV also set baseline parameters for the cars beyond just fuel economy.
Each car had to seat up to six occupants, had to survive a minimum of 100,000 miles, had to meet or exceed EPA Tier 2 standards, be at least 80 percent recyclable, and cost about the same as existing mid-size sedans. To say that these were lofty goals would be an understatement. Remember, the automakers involved were working with 1990s technology, too.
At the time, there were competing ideas in the automotive industry. Automakers were already hard at work cooking up EVs for California’s zero-emission mandate. At the same time, these same automakers, as well as universities, were researching hybridization as a way to leapfrog the efficiency of internal combustion engines.
AC Propulsion Tzero. Credit: Petersen Automotive Museum
Pioneering EV engineer Alan Cocconi, who would become known for his work on the GM EV1 and for being a co-founder of AC Propulsion, also got involved. He converted a Honda Civic to electric drive and managed a real-world range of 118 miles. Cocconi drove the car from California to Washington, D.C. in an attempt to convince the federal government to push the PNGV into an all-electric path. Washington ignored Cocconi’s proposal, but that didn’t deter him. He would later become one of the architects behind Tesla’s eventual success.
According to the book, Car Wars: The Rise, The Fall, And The Resurgence Of The Electric Car, a pivotal moment in the PNGV program came on October 27, 1995, when Toyota unveiled the concept for the first Prius. PNGV researchers were blown away. They had been studying hybrid systems, and here Toyota was with a hybrid car that was entering production soon. Then, in January 1996, GM showed the world the EV1.
The Prius was apparently a catalyst of sorts. It proved that hybrid technology was a working way to dramatically improve fuel efficiency. However, the gasoline-electric Prius fell short of the 80 mpg goal. But the PNGV researchers had a cure. They would take hybrid power and pair it with an efficient diesel engine. This determination came in 1997, or four years after the launch of PNGV.
The ‘Supercars’
Author
All of the Big Three settled on diesel-electric hybrid designs, and by December 1999, PNGV finally had something grand to show the world. Ford pulled the wraps off a sedan called the Prodigy, while Chrysler had the Dodge Intrepid ESX and General Motors had the Precept. All three cars were different flavors of the same idea.
I got to see the Prodigy in person when I went to the Ford Vault in Romulus, Michigan, and the car surprised me.
Author
Here’s what Ford said about the Prodigy during the car’s debut at the 2000 Detroit Auto Show:
The new Ford Prodigy is a hybrid electric family car prototype able to achieve more than 70 miles per gallon fuel economy. The lightweight, aerodynamic and fuel-efficient Prodigy – which will be unveiled at the North American International Auto Show – demonstrates Ford’s progress in developing a hybrid electric family vehicle with mass appeal. “The vehicle represents an interim stage between our P2000 research programs and our plans for an affordable, production hybrid.” says Neil Ressler, vice-president – Research and Vehicle Technology.
Author
The stylish, roomy Prodigy is designed to be stingy on fuel without sacrificing customer appeal in areas such as performance, affordability and roominess. The sedan is built on a lightweight platform, features a modern, aerodynamic design and is powered by a low storage requirement (LSR) hybrid electric powertrain. The Ford Prodigy features an aerodynamic design that enhances vehicle aesthetics while reducing air resistance. Prodigy’s 0.199 coefficient of drag – a measure of air resistance – is a 33-percent improvement compared with prior versions of the vehicle. Such a major improvement helps improve the vehicle’s fuel economy by 4 miles per gallon.
To enhance the vehicle’s aerodynamics, side-mounted cameras and onboard monitors are used in place of conventional side-view mirrors. The cameras provide a needed side view for the driver while not hindering air-flow around the vehicle. Variable ride height, grille shutters and shields under the car also add to the vehicle’s aerodynamic improvement. Prodigy’s platform is based on Ford’s extensive lightweight materials research. Prodigy’s total weight is 2,387 pounds, which is about 1,000 pounds lighter today’s family sedan. The significant weight reduction was achieved without sacrificing package efficiency. Prodigy is 30-percent lighter than today’s Taurus sedan, but – thanks to creative packaging and lightweight materials – passenger space and luggage capacity are the same. Prodigy’s low storage requirement hybrid electric propulsion system uses an aluminum DIATA (Direct Injection, Aluminum Through Bolt Assembly) engine, starter/alternator, automatically shifted manual transmission and high-power battery.
Author
The Prodigy is a work of engineering art. The body is made from a mix of aluminum and composites to keep weight down, and helping the car slice through the air is a total absence of mirrors. Instead, where each mirror would be, there’s a little bullet-style camera that feeds video to dashboard screens inside.
The 1.2-liter DIATA common rail turbodiesel four made 74 HP and, according to the Department of Energy, had a thermal efficiency of “greater than 40 percent.” The DOE also stated that the DIATA diesel was remarkably quiet compared to other diesels, thanks in part to computer design tools and Ford’s fast-track development program with partner FEV Engine Technology. Ford also utilized an exhaust gas recirculation system to reduce NOx emissions.
Author
The starter/alternator here was actually a 47 HP electric motor placed between the engine and the transmission. Combined with the gasoline engine, Ford quoted a total system output of 121 horsepower.
When the vehicle was on the move, the diesel engine did most of the work, but the electric motor was able to kick in to give an assist. Since the motor was also a starter/alternator, the system also allowed the engine to shut down when stopped. Then, when the engine needed to be called into action again, the motor was able to spin the engine back up in just 0.2 seconds, or as Ford said: “in the blink of an eye.”
Author
All of this was good for 72 mpg, at first. But later, it was reported that Ford did meet the 80 mpg goal. Ford quoted a range of 660 miles, and like any true nerdy hybrid car, you got to see the status of the vehicle’s hybrid system through the vehicle’s internal screens. The car also had active aero in the form of a grille that opened to the air only when needed.
GM Made A Rear-Engine Diesel Hybrid
GM
The GM Precept was equally as innovative. That car sported an air suspension, a heat pump climate control system, all-wheel-drive, electric doors, and an aluminum body. Like the Ford entry, it traded mirrors for cameras and screens.
A tiny 35-kW battery lived under the front seats, providing energy storage. The Precept was extra weird with a rear-mounted 1.3-liter three-cylinder turbodiesel engine, which was good for 54 HP. The engine drove the rear wheels through an automated-manual transmission, and there were also two electric motors. One motor lived in the rear with the engine, and a second was up front, which provided the AWD.
GM
GM said that the Precept could run on diesel power, electric power, or both, and that in testing, it scored 80 mpg. The Precept featured a drag coefficient of 0.163, which was said to be GM’s slickest car ever at that time. Despite all the tech, GM also succeeded in shedding weight. The Precept weighed about 460 pounds lighter than a typical mid-size GM sedan.
Chrysler Went Plastic
Finally, there was the Dodge Intrepid ESX III, and what made this one special was its realism. DaimlerChrysler went through three iterations of this concept, beginning in 1996, and it seemed like Chrysler did honestly try to make this seem more like a normal car. Designers knew that a fully aluminum body was going to be far too expensive for production, so it draped the ESX in plastic body panels like a Saturn.
Dodge
Power came from a 1.5-liter three-cylinder diesel built by Detroit Diesel. This engine made 74 HP and, when combined with an electric motor, was good for a total system power of 94 HP. Like the other cars, Chrysler went with an automated-manual transmission to combine manual fuel economy with the ease of use of an automatic. Chrysler called its box the “Electro Mechanical Automatic Transmission.” Meanwhile, a small lithium battery provided energy storage, and the car used regenerative braking to slow down and recharge that battery.
The Dodge was actually the least efficient of the trio, as Chrysler never advertised a rating higher than 72 mpg. However, in going through three iterations, Chrysler made great progress towards making a car that might have been able to be sold in a showroom. Reportedly, the first ESX concept was $60,000 more expensive to build than an equivalent Dodge Intrepid. By the ESX III, the gulf had narrowed to only $7,500. Chrysler was confident that, with more development, it could maybe get the ESX to a place where it could be produced. It even quoted a 60 mph acceleration time of 11 seconds and a weight of 2,250 pounds.
Dodge
Yet, none of these cars reached production, and the reasons were numerous.
Why PNGV Failed
As the CRS notes, the choice of diesel power poisoned the program before the show cars even saw the light of day. Environmentalists said that the diesel engines were far too dirty and betrayed the purpose of the PNGV program. Some critics went as far as to argue that the diesels actually wouldn’t comply with the EPA’s Tier 2 emissions standards, which were a requirement of the program. According to CRS, environmental groups also questioned the honesty of the program. Some argued that PNGV was actually just a way for the government to delay increasing Corporate Average Fuel Economy standards.
The ESX III engine. Credit: Dodge
That put the program on a bit of shaky ground, but it got even worse from there.
As I sort of hinted above, these cars were expensive bits of kit. Yes, Ford and GM both hit 80 mpg and Chrysler came close, but by Chrysler’s own admission, had it put the ESX III into production, it would have been much more expensive than an existing car. The Ford and GM entries used even more expensive materials. This meant that the program would, in theory, fail in two of its main objectives.
Then, there was a question about whether the automakers could even mass-produce these cars. Building one-off prototypes is one thing; actually tooling up a factory to crank them out in the tens of thousands is another.
The Prodigy engine. Credit: Ford
Perhaps the biggest question of all was the government’s exact role in all of this. From CRS:
Another issue that was raised was whether the federal government should support this research at all, and that the program amounted to “corporate welfare.” According to the Cato Institute, “taxpayers should not be forced to help private companies develop profitable new products in the first place.” This concern contributed to a June 14, 2000 House of Representatives vote to eliminate funding for PNGV in the FY 2001 appropriations bill (P.L. 106-291), and to use the funds for debt reduction.
In the final conference, PNGV funding was reinstated. Because consumers generally do not make fuel economy a high priority, supporters of PNGV argued that it may be necessary for the federal government to intervene to limit petroleum dependence. Further, according to industry estimates, auto manufacturers spent three times as much as the government per year on PNGV research. A related issue is the question of whether the program “picked winners” through its selective technology focus.
Critics argued that too much funding was being directed at the technologies chosen for implementation in goal 3 of the partnership. PNGV supporters countered that research was continuing on topics unrelated to goal 3 (the supercar), but which may have helped the partnership meet goals 1 and 2 (improved domestic competitiveness, and implementation of new technologies in conventional vehicles, respectively). These technologies included research on fuel cells and other advanced technologies. Other concerns that were raised at the beginning of the partnership centered on questions of antitrust and intellectual property rights.
The ESX III interior. Credit: Dodge
Ralph Nader called the program, “an effort to coordinate the transfer of property rights for federally funded research and development to the automotive industry.”
On January 8, 2002, with the support of the Big Three, President George W. Bush canceled the PNGV program, replacing it with the less ambitious Freedom Car program. For the most part, the project was forgotten. A couple of examples of the Ford Prodigy concept have been sold at auction, and one currently lives in the Ford Vault.
PNGV Did Move The Needle A Little
Author
The PNGV program wasn’t a total waste. In developing 80 mpg sedans, engineers figured out new ways to reduce vehicle weight, new ways to clean up diesel exhaust emissions, and even reduced the cost of materials like aluminum, magnesium, and composites for automotive use. Ford used some of the styling cues from the Prodigy in the Fusion and the Five Hundred.
PNGV, like California’s old zero-emission program, seemed to have good intentions, but it might have been a bit too far ahead of its time. Today, hybrid cars are commonplace. Sure, they don’t use diesel engines and generally don’t use exotic materials, but they are affordable, and it’s entirely possible to hit or exceed 50 mpg with one.
But back in the 1990s, hybrids were a lot more novel, and for a while, Detroit and the U.S. government spent over a billion dollars a year to give America 80 mpg diesel-electric sedans. I wonder what would have happened had the project succeeded. Would diesel-electrics be commonplace today?
Top graphic images: Ford; Mercedes Streeter